Need Help With Your Order?

Call our Team on 0115 6976 800

Easy-Trim  |  SKU: 949505

Easy-Trim Grafter Roofing Breather Membrane - 1m x 50m (50m²)


£48.33 Ex VAT
£58.00 Inc VAT
Shipping calculated at checkout.

Nationwide Delivery in 3-5 WORKING DAYS

  • Delivery: £35 ex VAT (only £25 with order value over £120 inc vat)

Need a next-day or named day delivery? Call Us.


The Easy-Trim “Grafter” Roofing Breather Membrane is an entry-level breather membrane for use in warm and cold roofs. Install across roofing rafters with printed side facing out, before the installation of roofing battens. Seal overlap with Breather Membrane Tape. Suitable for warm, cold and hybrid roof applications and sarking boards. 

  • Supplied in rolls
  • BBA certified for warm and cold roof applications
  • Conforms to BS5534.
  • UV stable for 3 months
  • Vapour Permeable

Length: 

50m Roll

Thickness:

100gsm

Width: 

1m

Coverage:

50m2

Resistance to Water Penetration:

W1 Class

Reaction to Fire:

E Class

Low Temperature Stability (no cracking at):

-40°C


What is a Breather Membrane?

Breather Membranes are designed to allow wall and roof structures to release excess moisture vapour into the atmosphere - to “breathe” - without allowing wind-driven rain and dust to penetrate wall or roof structures. They must be installed on the exterior (“cold”) side of any structure - beneath the main outer building lining, roof tiles or cladding.

It is advised to seal your Breather Membrane with corresponding Lap Tapes for a quality, breathable seal. 

How do I Apply a Breather Membrane?

A breather membrane should be applied on the exterior side of any wall or roofing structure - under the outer building lining, roof tiles or cladding. It should be fixed at intervals with suitable, permanent fixings and finished with Breather Membrane Tape for the most reliable and air-tight finish. It is best used in conjunction with a Vapour Control Layer applied to the interior of the structure. 

For more information on use and specification, please download the data sheet for this product below. 

Data Sheets & Information

Need Help? Call our Team on 0115 6976 800
  • Size
    1m x 50m
  • Coverage (m²)
    50
  • Thickness
    100gsm
  • Length
    50m
  • Width
    1m
  • Material
    Polypropylene
  • Water Resistance
    W1 Class
  • Reaction to Fire
    E Class

Do You Ship to My Address?

We deliver to most mainland UK addresses. If you are in one of the areas listed below and are unable to checkout, please give us a call to put together a custom quote.

Northern Ireland (BT), Isle of Wight (PO30-37), Isle of Man (IM), Scottish Highlands and Orkney Isles (PA, ML, EH, KA, G, KY, PH, DD, AB, IV, KW), Outer Hebrides and the Shetland Isles (HS, ZE) will incur additional charges and may also experience delivery delays.

How Much Will My Delivery Cost?

You can work out the cost of delivery on your order before checkout by heading to our Delivery Info page.

How Long Will Delivery Take?

We aim to deliver your items in 3 - 5 Working Days unless otherwise specified (eg - Sheds and Paving Kits). After you have placed your order, we will process your order and book a delivery day - which will then be sent to you via Email.

If have a specific request, please do give our team a call on 01156976800 and we will do our best to help.

What If I Need to Return Something?

If for any reason you wish to return your purchase, we will offer a refund or an exchange as long as this is requested within 14 days of receiving your order.

A manufacturer’s restocking charge may also apply on certain products such as non-stock items, which may be up to 30% of the purchase price, and you will be notified of this amount when you request a refund or exchange.

For full information visit our Returns Policy.

breather-membrane-delivery
Easy-Trim

Easy-Trim Grafter Roofing Breather Membrane - 1m x 50m (50m²)

£48.33 Ex VAT
£58.00 Inc VAT

The Easy-Trim “Grafter” Roofing Breather Membrane is an entry-level breather membrane for use in warm and cold roofs. Install across roofing rafters with printed side facing out, before the installation of roofing battens. Seal overlap with Breather Membrane Tape. Suitable for warm, cold and hybrid roof applications and sarking boards. 


Length: 

50m Roll

Thickness:

100gsm

Width: 

1m

Coverage:

50m2

Resistance to Water Penetration:

W1 Class

Reaction to Fire:

E Class

Low Temperature Stability (no cracking at):

-40°C


What is a Breather Membrane?

Breather Membranes are designed to allow wall and roof structures to release excess moisture vapour into the atmosphere - to “breathe” - without allowing wind-driven rain and dust to penetrate wall or roof structures. They must be installed on the exterior (“cold”) side of any structure - beneath the main outer building lining, roof tiles or cladding.

It is advised to seal your Breather Membrane with corresponding Lap Tapes for a quality, breathable seal. 

How do I Apply a Breather Membrane?

A breather membrane should be applied on the exterior side of any wall or roofing structure - under the outer building lining, roof tiles or cladding. It should be fixed at intervals with suitable, permanent fixings and finished with Breather Membrane Tape for the most reliable and air-tight finish. It is best used in conjunction with a Vapour Control Layer applied to the interior of the structure. 

For more information on use and specification, please download the data sheet for this product below. 

Data Sheets & Information

View product